HC-06 Bluetooth Module (Serial TTL)
230.00 EGP
HC-06 Bluetooth slave module: UART-to-Bluetooth link, Bluetooth 2.0 + EDR, 2.4 GHz band, default 9600 bps, simple wireless serial for embedded systems.
| Weight | 0.01 kg |
|---|---|
| Dimensions | 4 × 2.5 × 1 cm |
Out of stock
HC-06 Bluetooth Module
The HC-06 is a compact wireless serial interface module designed to enable Bluetooth communication between a microcontroller or embedded system and a master Bluetooth device (such as a smartphone, tablet or PC). It implements a transparent UART-to-Bluetooth link, meaning data transmitted into its RX/TX pins is sent wirelessly and received data is output on the serial pins, simplifying integration.
Engineered as a slave-only Bluetooth module operating under the Bluetooth 2.0 + EDR (Enhanced Data Rate) standard, the HC-06 abstracts away much of the complexity of wireless connectivity. Through simple UART commands and default baud rate (often 9600 bps) the module can pair with a master device, authenticate using a default pass-key (often “1234”) and then forward traffic transparently over the link.
Owing to its small physical size, minimal external components and UART interface, the HC-06 finds wide use in hobby electronics, embedded systems and IoT projects. It draws modest current, uses the 2.4 GHz ISM band (2.402-2.480 GHz), and allows devices without native Bluetooth capability to gain wireless serial connectivity. The simplicity of wiring and communication means it can often be dropped into an existing system with minimal redesign.
Features:
- Slave-mode only Bluetooth 2.0 + EDR module.
- Transparent UART interface for wireless serial data exchange.
- Operates in 2.402 GHz to 2.480 GHz ISM frequency band.
- Default baud rate commonly 9600 bps, default pass-key “1234”.
- Low power consumption suitable for embedded/battery-powered systems.
- Built-in 2.4 GHz antenna on many breakout versions.
- Simple wiring: VCC, GND, TXD, RXD (plus optional Key/State pins) for typical modules.
Specifications:
| Parameter | Value |
|---|---|
| Bluetooth protocol | Bluetooth 2.0 + EDR |
| Frequency band | 2.402 GHz – 2.480 GHz |
| Power level | Class 2 (+6 dBm typical) |
| Receiver sensitivity | –85 dBm (typical) |
| Supply voltage (module) | ~3.3 V to ~6 V (some 5 V tolerant but logic levels 3.3 V) |
| Operating current | ~40 mA typical |
| Default UART baud rate | 9600 bps |
| Logic level on RXD/TXD | 3.3 V typical (not 5 V tolerant) |
| Operating temperature range | –20 °C to +55 °C (typical module) |
Applications:
- Wireless serial communication for microcontrollers.
- Bluetooth interface for robots, drones and IoT devices.
- Data transmission between embedded systems and smartphone/PC.
- Remote control and telemetry modules.
Package Contents:
- 1x HC-06 Bluetooth Module
HC 06 Bluetooth Module Datasheet
Related products
WIFI Serial Module ESP-01 Adapter Board (3.3V 5V)
The use of an ESP8266 with Arduino requires logic level translation of the UART signal, as provided by this easy 3.3 V – 5 V adapter. It makes the ESP-01 ESP8266 WiFi module the easiest WiFi transceiver for your Arduino (5 V).
NRF24L01 Wireless Module Adapter Board
This 5V-3.3V VCC Adapter Board for NRF24L01 Wireless Module enables you to use NRF24L01-type transceivers on 5V systems like Arduino.
It regulates the 5V input to 1.9~3.6V DC and incorporates bypass capacitors for reliable operation. The NRF24L01 utilizes the Enhanced ShockBurst (ESB) protocol to support two-way data packet communication with packet buffering, packet acknowledgment, and automatic retransmission of lost packets.
Reviews
There are no reviews yet.