Sold out
CR10 Aluminum Heated Bed 310x310x3mm. 24V, 220W, With NTC and 90cm Cable
E3D V6 Heatsink - Direct Extrusion
E3D V6 Heatsink - Direct Extrusion Original price was: 55.00 EGP.Current price is: 45.00 EGP.
Back to products
T GPIO Breakout Board With 40Pin Cable For Raspberry Pi
T GPIO Breakout Board With 40Pin Cable For Raspberry Pi Original price was: 170.00 EGP.Current price is: 140.00 EGP.

CR10 Aluminum Heated Bed 310x310x3mm. 24V, 220W, With NTC and 90cm Cable

1,550.00 EGP

CR10 Aluminum Heated Bed 310x310x3mm.

Weight0.75 kg
Dimensions31 × 31 × 0.3 cm

Out of stock

Compare
Add to wishlist
SKU: 29789 Category:
Description

CR10 Aluminum Heated Bed 310x310x3mm. 24V, 220W, With NTC and 90cm Cable. A cable in the stated connector configuration.

Specifications

  • Voltage: 24 V
  • Cable / lead length: 3 mm
  • Named dimensions: 310 × 310 × 3 mm
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “CR10 Aluminum Heated Bed 310x310x3mm. 24V, 220W, With NTC and 90cm Cable”

Your email address will not be published. Required fields are marked *

Related products

eSUN Green PLA+ 3D Filament, 1.75mm, 1kg/Roll
-32%
Compare

eSUN Green PLA+ 3D Filament, 1.75mm, 1kg/Roll

,
Original price was: 950.00 EGP.Current price is: 650.00 EGP.

eSUN PLA filament in green for 3D printing.

Add to wishlist
RAMPS LCD 4x20 Controller with SD Card Interface
-18%
Compare

RAMPS LCD 4×20 Controller with SD Card Interface

Original price was: 445.00 EGP.Current price is: 365.00 EGP.

RAMPS LCD2004 controller with a 20-character, 4-line display, rotary encoder and SD card interface for compatible 3D printer control boards.

Add to wishlist
TMC2208 V1.2 Stepper Motor Driver Module
-17%
Compare

TMC2208 V1.2 Stepper Motor Driver Module

,
Original price was: 235.00 EGP.Current price is: 195.00 EGP.

Configuration: CFG or UART

Microsteps: Up to 1/256

MicroPlyer: 1/256

Logic Voltage VI0: 3-5V

Motor Voltage : 5.5-36V

Motor Phase Current: 1.2A RMS, 2.0A Peak

Add to wishlist
T8 Lead Screw End Support
-17%
Compare

T8 Lead Screw End Support

Original price was: 180.00 EGP.Current price is: 150.00 EGP.

Bearing Diameter: 8mm.

Base-to-Ball Bearing Distance: 21mm.

Construction: Precision CNC.

Material: Aluminum Alloy.

Color: Black

Finish: Anodized

Dimensions:

Length: 45mm

Width: 34mm

Height: 17mm

Weight: 70g.

Add to wishlist
CNC Shield V3.0 For Arduino Uno
-18%
Compare

CNC Shield V3.0 For Arduino Uno

,
Original price was: 120.00 EGP.Current price is: 99.00 EGP.

The Arduino CNC 3D Printer Shield V3.0 is developed especially for those beginners who are interested in CNC or 3D printers. This expansion board can be used for engraving machines, and 3D printers with a total of four slots, and can drive four A4988 or Drv8825 stepper motor drivers.

Add to wishlist
Electronic component used in multiple product listings
-18%
Compare

20Teeth GT2 Idler Pulley, 10mm Width, 5mm Bore

Original price was: 55.00 EGP.Current price is: 45.00 EGP.
  • Product type: GT2 Pulley
  • Material: Aluminum alloy
  • Tooth Profile: GT2
  • No. of teeth: 20
  • Bore: 5mm
  • Suitable Belt: 10mm
Add to wishlist
TR8x8 Acme Leadscrew Copper Nut, 4 Start, 2mm Lead
Compare

TR8x8 Acme Leadscrew Copper Nut, 4 Start, 2mm Lead

42.00 EGP
  • Material: Copper
  • Leadscrew Diameter: 8mm
  • Pitch: 2mm
  • Lead: 8mm
  • No. of starts: 4
  • Dimensions: 22x22x10.5mm
    • Length: 22mm
    • Width: 22mm
    • Hight: 10.5mm
Add to wishlist
Electronic component used in multiple product listings
-25%
Compare

0.6mm E3D Stainless Steel Volcano Nozzle

Original price was: 40.00 EGP.Current price is: 30.00 EGP.

0.6mm stainless steel E3D Volcano nozzle for compatible 3D printer hotends. Check nozzle dimensions and hotend compatibility before installation.

Add to wishlist