Arduino MEGA 2560 CH340
1,450.00 EGP
Arduino MEGA 2560 CH340: High-performance ATmega2560 board with 54 digital I/O, 16 analog pins, and CH340 for USB. Ideal for advanced robotics and 3D printing.
| Weight | 0.04 kg |
|---|---|
| Dimensions | 10.15 × 5.34 × 1.5 cm |
25 in stock
Arduino MEGA 2560 CH340
The Arduino Mega 2560 is centered around the ATmega2560 microcontroller, providing a robust platform for demanding sketches that exceed the memory limits of smaller boards. It features 54 digital I/O pins and 16 analog inputs, allowing for the simultaneous control of multiple motors, sensors, and displays.
Features:
- High Pin Count.
- Expanded Memory.
- Quad Hardware Serial.
- CH340 Chip.
- Shield Compatibility.
Specifications:
| Component | Specification |
| Microcontroller: | ATmega2560 |
| USB-Serial Processor: | CH340 |
| Operating Voltage: | 5V |
| Input Voltage (Recommended): | 7–12V |
| Input Voltage (Limit): | 6–20V |
| Digital I/O Pins: | 54 (15 provide PWM output) |
| Analog Input Pins: | 16 |
| DC Current per I/O Pin: | 20 mA |
| Flash Memory: | 256 KB (8 KB used by bootloader) |
| SRAM: | 8 KB |
| EEPROM: | 4 KB |
| Clock Speed: | 16 MHz |
Applications:
- 3D Printers.
- Robotics.
- Home Automation.
- Data Logging & Sensor Networks.
- Industrial Control & Prototyping.
Package Content:
- 1x Arduino MEGA 2560 CH340
Documents:
Related products
WeMos D1 ESP8266 WiFi Board (UNO Based)
The ESP8266 D1 R1 WiFi board utilizes the ESP8266 WiFi enabled processor, and puts it onto an Arduino Uno board footprint. It provides a way to work with the ESP8266 in a familiar setup and does not require a breadboard in order to make interconnections since it has the typical on-board female headers. It will also work with some Uno shields that have compatible I/O pin-outs.
WIFI Serial Module ESP-01 Adapter Board (3.3V 5V)
The use of an ESP8266 with Arduino requires logic level translation of the UART signal, as provided by this easy 3.3 V – 5 V adapter. It makes the ESP-01 ESP8266 WiFi module the easiest WiFi transceiver for your Arduino (5 V).
NRF24L01 Wireless Module Adapter Board
This 5V-3.3V VCC Adapter Board for NRF24L01 Wireless Module enables you to use NRF24L01-type transceivers on 5V systems like Arduino.
It regulates the 5V input to 1.9~3.6V DC and incorporates bypass capacitors for reliable operation. The NRF24L01 utilizes the Enhanced ShockBurst (ESB) protocol to support two-way data packet communication with packet buffering, packet acknowledgment, and automatic retransmission of lost packets.
Reviews
There are no reviews yet.