eSUN Grass Green PLA+ 3D Filament 1.75mm 1kg

eSUN Grass Green PLA+ 3D Filament, 1.75mm, 1kg/Roll

PLA+ is a type of 3D printer filament that is based on standard PLA, but with extra additives to enhance a wide range of qualities. It addresses many of the common problems that PLA presents, such as the brittle nature, low elongation breaking point, as well as layer adhesion. The only area in which regular PLA beats PLA+ is in tensile strength, although it is a slight difference, and is far outweighed by the plethora of benefits.

Specification:

• Brand: eSUN
• Material: PLA+
• Diameter: 1.75mm
• Weight: 1KG/Spool
• Print Temp: 205~225°C
• Bed Temp: 0~80°C
• Density: 1.24 g/cm³
• Distortion Temp: 52°C, 0.45MPa
• Tensile Strength: 60 MPa
• Elongation at Break: 29%
• Bending Strength: 87 MPa
• IZOD Impact Strength: 7 kJ/m²

Advantages Of PLA+ Over PLA:

• Easier to work with.
• Better, smoother Finish.
• Less spider-webbed prints.
• More flame resistant.
• Greater layer adhesion.
• Lower distortion temperature.
• Produces strong and durable prints.
• Lower Melt Flow Index.
• Higher stable print temperatures.

Characteristics:

• Extracted and purified from corn grain.
• High rigidity.
• good glossiness and transparency.
• Suitable for printing larger models.
• Toughness is 10 times more than the PLA on the market.
• No wiredrawing problems.
• the surface of the printouts will be smoother and more delicate.
• No cracking problem

Package Includes:

• 1kg /spool – eSUN 3d Printer Filament 1.75mm