Arduino Shield – Nano CNC Machine V4 Board
Original price was: 120.00 EGP.99.00 EGPCurrent price is: 99.00 EGP.
This board is widely used for driver expansion board of engraving machines. There are a total 3 3-way slots for stepper motor driver modules (Model A4988 or Drv8825 – It sold separately at our store), and it can drive 3-way stepper motors each up to 2A. Each way stepper motor has two I/O ports and it means 6 I/O ports can manage 3 stepper motors. It is very convenient to operate.
| Weight | 0.032 kg |
|---|---|
| Dimensions | 7.2 × 5.9 × 2 cm |
10 in stock
Arduino Shield – Nano CNC Machine V4 Board
The CNC Shield V4 interfaces seamlessly with Arduino Nano, enabling standalone or PC-controlled operation via Arduino GRBL software. It supports precise CNC control through G-codes. With three labeled axes (X, Y, Z), this expansion board offers adjustable microstepping, achieving 1/32 step (DRV8825) or 1/16 step (A4988) capability. Conveniently set the operating mode via jumpers M0, M1, and M2.
The board features limit switch connectors with polarized arrangements for each axis. Essential buttons (Abort, Hold, Resume) and a cooling activation button (CoolEn) enhance your CNC experience. A standard DC Jack (2.5mm x 5.5mm) accommodates 7.5-12V power supplies. Safety and control are ensured with a reboot button and an emergency stop button (E-STOP).
Flexible UART and I2C interfaces, along with adjustable logic supply voltage (3.3-5V), add versatility. The CNC Shield V4 makes motor power supply adjustment effortless, thanks to a jumper on the Mot-VOT-Sel board.
Features:
- 3 axis stepper motor driver
- Compatible with micro-drive engraving machine, three-axis CNC engraving machine or 3D printers
- Can control two-phase four-wire stepper motor up to 2A.
- Enabled digital IO interface, easy to connect with other modules, such as a limit switch / limit stop.
- Enabled I2C interface for connection to the LCD I2C or other I2C modules
- GRBL compatible
- Worked with arduino nano
Specifications:
- Compatible Controllers: Arduino Nano
- Number of Axes: 3 (X, Y, Z)
- Logic Supply Voltage: 3.3 – 5V
- Power Supply Voltage: 7.5 – 12V
- Compatible Drivers: A4988 and DRV8825
- Interfaces: UART, I2C
- Software: Arduino GRBL
- Dimensions: 72 x 59 x 20mm
Board Layout
Jumper Microstep Configuration
| MS1 | MS2 | MS3 | Microstep Resolution |
|---|---|---|---|
| Low | Low | Low | Full step |
| High | Low | Low | 1/2 step |
| Low | High | Low | 1/4 step |
| High | High | Low | 1/8 step |
| High | High | High | 1/16 step |
Applications:
- 3D Printer
- Engraving machines
Related products
WeMos D1 ESP8266 WiFi Board (UNO Based)
The ESP8266 D1 R1 WiFi board utilizes the ESP8266 WiFi enabled processor, and puts it onto an Arduino Uno board footprint. It provides a way to work with the ESP8266 in a familiar setup and does not require a breadboard in order to make interconnections since it has the typical on-board female headers. It will also work with some Uno shields that have compatible I/O pin-outs.
STM32F103C8T6 ARM Minimum System Development Board
- Number of pins: 48
- Kernel: ARM Cortex-M3
- Operating frequency: 72MHz
- Storage resources: 64K Byte Flash, 20KByte SRAM
- Interface Resources: 2x SPI, 3x USART, 2x I2C, 1x CAN, 37x I / O ports,
- Analog-to-digital conversion: 2x ADC (12-bit / 16-channel)
- Timers: 3 general timers and 1 advanced timer
- Debug Download: Support JTAG / SWD debug interface to download, support for IAP.
- RT9193: 3.3V regulator chip, a maximum output of 300mA.
NRF24L01 Wireless Module Adapter Board
This 5V-3.3V VCC Adapter Board for NRF24L01 Wireless Module enables you to use NRF24L01-type transceivers on 5V systems like Arduino.
It regulates the 5V input to 1.9~3.6V DC and incorporates bypass capacitors for reliable operation. The NRF24L01 utilizes the Enhanced ShockBurst (ESB) protocol to support two-way data packet communication with packet buffering, packet acknowledgment, and automatic retransmission of lost packets.
Reviews
There are no reviews yet.