8x10MM Flexible Shaft Coupler
Toothless GT2 Idler Pulley, 10mm Width, 5mm Bore
20Teeth GT2 Idler Pulley, 6mm Width, 3mm Bore
- Product type: GT2 Pulley
- Material: Aluminum alloy
- Tooth Profile: GT2
- No. of teeth: 20
- Bore: 3mm
- Suitable Belt: 6mm
20Teeth GT2 Idler Pulley, 6mm Width, 5mm Bore
- Product type: GT2 Pulley
- Material: Aluminum alloy
- Tooth Profile: GT2
- No. of teeth: 20
- Bore: 5mm
- Suitable Belt: 6mm
M6 Sliding Tee Nut For 2020 Aluminum Profile
M3 Sliding Tee Nut For 2020 Aluminum Profile
Solid V Wheel
LASER Receiver Module
eSUN Aqua PLA+ 3D Filament, 1.75mm, 1kg/Roll
PLA+ is a type of 3D printer filament that is based on standard PLA, but with extra additives to enhance a wide range of qualities. It addresses many of the common problems that PLA presents, such as the brittle nature, low elongation breaking point, as well as layer adhesion. The only area in which regular PLA beats PLA+ is in tensile strength, although it is a slight difference, and is far outweighed by the plethora of benefits.
eSUN Soft Pink PLA+ 3D Filament, 1.75mm, 1kg/Roll
PLA+ is a type of 3D printer filament that is based on standard PLA, but with extra additives to enhance a wide range of qualities. It addresses many of the common problems that PLA presents, such as the brittle nature, low elongation breaking point, as well as layer adhesion. The only area in which regular PLA beats PLA+ is in tensile strength, although it is a slight difference, and is far outweighed by the plethora of benefits.
eSUN Haze Blue PLA+ 3D Filament, 1.75mm, 1kg/Roll
PLA+ is a type of 3D printer filament that is based on standard PLA, but with extra additives to enhance a wide range of qualities. It addresses many of the common problems that PLA presents, such as the brittle nature, low elongation breaking point, as well as layer adhesion. The only area in which regular PLA beats PLA+ is in tensile strength, although it is a slight difference, and is far outweighed by the plethora of benefits.
eSUN Beige PLA+ 3D Filament, 1.75mm, 1kg/Roll
PLA+ is a type of 3D printer filament that is based on standard PLA, but with extra additives to enhance a wide range of qualities. It addresses many of the common problems that PLA presents, such as the brittle nature, low elongation breaking point, as well as layer adhesion. The only area in which regular PLA beats PLA+ is in tensile strength, although it is a slight difference, and is far outweighed by the plethora of benefits.
eSUN Lilac PLA+ 3D Filament, 1.75mm, 1kg/Roll
PLA+ is a type of 3D printer filament that is based on standard PLA, but with extra additives to enhance a wide range of qualities. It addresses many of the common problems that PLA presents, such as the brittle nature, low elongation breaking point, as well as layer adhesion. The only area in which regular PLA beats PLA+ is in tensile strength, although it is a slight difference, and is far outweighed by the plethora of benefits.
eSUN Milky White PLA+ 3D Filament, 1.75mm, 1kg/Roll
PLA+ is a type of 3D printer filament that is based on standard PLA, but with extra additives to enhance a wide range of qualities. It addresses many of the common problems that PLA presents, such as the brittle nature, low elongation breaking point, as well as layer adhesion. The only area in which regular PLA beats PLA+ is in tensile strength, although it is a slight difference, and is far outweighed by the plethora of benefits.
eSUN Grass Green PLA+ 3D Filament, 1.75mm, 1kg/Roll
PLA+ is a type of 3D printer filament that is based on standard PLA, but with extra additives to enhance a wide range of qualities. It addresses many of the common problems that PLA presents, such as the brittle nature, low elongation breaking point, as well as layer adhesion. The only area in which regular PLA beats PLA+ is in tensile strength, although it is a slight difference, and is far outweighed by the plethora of benefits.
eSUN Blue PLA+ 3D Filament, 1.75mm, 1kg/Roll
PLA+ is a type of 3D printer filament that is based on standard PLA, but with extra additives to enhance a wide range of qualities. It addresses many of the common problems that PLA presents, such as the brittle nature, low elongation breaking point, as well as layer adhesion. The only area in which regular PLA beats PLA+ is in tensile strength, although it is a slight difference, and is far outweighed by the plethora of benefits.
STM32F103C8T6 ARM STM32 Minimum System Development Board
- Number of pins: 48
- Kernel: ARM Cortex-M3
- Operating frequency: 72MHz
- Storage resources: 64K Byte Flash, 20KByte SRAM
- Interface Resources: 2x SPI, 3x USART, 2x I2C, 1x CAN, 37x I / O ports,
- Analog-to-digital conversion: 2x ADC (12-bit / 16-channel)
- Timers: 3 general timers and 1 advanced timer
- Debug Download: Support JTAG / SWD debug interface to download, support for IAP.
- RT9193: 3.3V regulator chip, a maximum output of 300mA.
FG Sunny Orange PLA 3D Filament, 1.75mm , 1kg/Roll
0.2mm E3D Stainless Steel Volcano Nozzle
- Material: Stainless steel for corrosion resistance and durability.
- Nozzle Size: 0.2mm for high-detail, fine-resolution 3D printing.
- Filament Compatibility: Designed for 1.75mm diameter filaments.
- Thread Type: Standard M6 external thread.
- Hotend Compatibility: Extended Volcano heater block style (not compatible with standard V6 blocks)