Showing 721–744 of 1101 resultsSorted by price: low to high

KY-008 Laser Transmitter Module 5mW (Arduino Compatible)

35.00 EGP
  • The laser transmitter module, 650 nm (red), gives a small, intense beam (DOT) Shape.
  • Power consumption: 30 mA at 5 V

W1209 Clear Acrylic Enclosure

Original price was: 50.00 EGP.Current price is: 35.00 EGP.
  • Temperature range : -50°C ~ 110°C
  • Dimensions: 48.5 x 40mm
  • Temperature control mode: ON / OFF
  • Resolution: When temperature is 0.1°C, the resolution is -9.9~99.9, other temperature segment is 1°C
  • Control accuracy: 0.1°C
  • Hysteresis accuracy: 0.1°C
  • Refresh rate: 0.5S
  • High temperature protection: 0°C - 110°C
  • Supply voltage: DC 12V, 24V
  • Static current: ≤ 35 mA, attract current ≤ 65 mA
  • Output voltage: DC 12V, 24V
  • Output power: 20A relay
  • Measurement input: NTC (10K 0.5%) Waterproof Sensor
  • Environmental requirements: -10°C ~ 60°C,Humidity 20% -85%
  • Light color: Red/Blue(option)
  • Temperature range : -50°C ~ 110°C
  • Dimensions: 48.5 x 40mm
  • Temperature control mode: ON / OFF
  • Resolution: When temperature is 0.1°C, the resolution is -9.9~99.9, other temperature segment is 1°C
  • Control accuracy: 0.1°C
  • Hysteresis accuracy: 0.1°C
  • Refresh rate: 0.5S
  • High temperature protection: 0°C - 110°C
  • Supply voltage: DC 12V, 24V
  • Static current: ≤ 35 mA, attract current ≤ 65 mA
  • Output voltage: DC 12V, 24V
  • Output power: 20A relay
  • Measurement input: NTC (10K 0.5%) Waterproof Sensor
  • Environmental requirements: -10°C ~ 60°C,Humidity 20% -85%
  • Light color: Red/Blue(option)

Power Bank Module Single USB Type C 5V 1A

Original price was: 55.00 EGP.Current price is: 35.00 EGP.

Power Bank Module Single USB Type C 5V-1A. A USB interface accessory in the stated connection format.

GT2 Idler Pulley 20 Teeth 5mm Bore (6mm Width)

Original price was: 40.00 EGP.Current price is: 35.00 EGP.
  • Product type: GT2 Pulley
  • Material: Aluminum alloy
  • Tooth Profile: GT2
  • No. of teeth: 20
  • Bore: 5mm
  • Suitable Belt: 6mm

GT2 Idler Pulley 20 Teeth 3mm Bore (6mm Width)

Original price was: 50.00 EGP.Current price is: 35.00 EGP.
  • Product type: GT2 Pulley
  • Material: Aluminum alloy
  • Tooth Profile: GT2
  • No. of teeth: 20
  • Bore: 3mm
  • Suitable Belt: 6mm

Plug Connector 6 Wire Male Female Xh2.54

36.00 EGP

Plug Connector 6 Wire Male Female Xh2.54. A connector in the stated contact and mounting format.

SM.22AWG – 6 Pin Male + Female SM Cable Wire Plug Connectors

36.00 EGP

SM.22AWG - 6 Pin Male + Female SM Cable Wire Plug Connectors. A connector in the stated contact and mounting format.

IRF740P, N-Channel MOSFET, 10 A, 400 V, 3-Pin TO-220

36.00 EGP

IRF740P, N-Channel MOSFET, 10 A, 400 V, 3-Pin TO-220. Package: TO-220. Contact / pin count: 3.

18650 Battery Holder PCB 4 Cells

40.00 EGP

18650 Battery Holder PCB 4 Cells. A holder for the specified battery format and cell count.

0.25mm E3D Stainless Steel Volcano Nozzle

40.00 EGP

0.25mm stainless steel E3D Volcano nozzle for compatible 3D printer hotends. Check nozzle dimensions and hotend compatibility before installation.

DEXLE Replacement Tip For 30W Soldering Iron Black

Original price was: 48.00 EGP.Current price is: 40.00 EGP.

DEXLE Replacement Tip For 30W Soldering Iron Black. A tool for heating solder joints.

DEXLE Replacement Tip For 40W Soldering Iron Black

Original price was: 48.00 EGP.Current price is: 40.00 EGP.

DEXLE Replacement Tip For 40W Soldering Iron Black. A tool for heating solder joints.

300mm Nylon Cable Ties Pack of 100 Pcs (China)

Original price was: 50.00 EGP.Current price is: 40.00 EGP.

300mm Nylon Cable Ties Pack of 100 Pcs (China). A cable in the stated connector configuration.

NRF24L01 Wireless Module Adapter Board

40.00 EGP

This 5V-3.3V VCC Adapter Board for NRF24L01 Wireless Module enables you to use NRF24L01-type transceivers on 5V systems like Arduino.

It regulates the 5V input to 1.9~3.6V DC and incorporates bypass capacitors for reliable operation. The NRF24L01 utilizes the Enhanced ShockBurst (ESB) protocol to support two-way data packet communication with packet buffering, packet acknowledgment, and automatic retransmission of lost packets.