Showing 217–240 of 1101 resultsSorted by average rating

627ZZ Miniature Ball Bearing 7x22x7mm (Shielded)

Original price was: 20.00 EGP.Current price is: 15.00 EGP.
  • Model: 627
  • Material: Sheet Steel
  • Size: 7x22x7mm
  • Inner Diameter: 7mm
  • Outer Diameter: 22mm
  • Thickness: 7mm
  • Rows Of Balls: single row
  • Seal: ZZ

695ZZ Miniature Ball Bearing 5x13x4mm (Shielded)

Original price was: 20.00 EGP.Current price is: 15.00 EGP.
  • Model: 695
  • Material: Sheet Steel
  • Size: 5x13x4mm
  • Inner Diameter: 5mm
  • Outer Diameter: 13mm
  • Thickness: 4mm
  • Rows Of Balls: single row
  • Seal: ZZ

696ZZ Miniature Ball Bearing 6x15x5mm (Shielded)

Original price was: 20.00 EGP.Current price is: 15.00 EGP.
  • Model: 696
  • Material: Sheet Steel
  • Size:6x15x5mm
  • Inner Diameter: 6mm
  • Outer Diameter: 15mm
  • Thickness: 5mm
  • Rows Of Balls: single row
  • Seal: ZZ

6000ZZ Ball Bearing 10x26x8mm (Shielded)

20.00 EGP
  • Model: 6000
  • Material: Sheet Steel
  • Size: 10x26x8mm
  • Inner Diameter: 10mm
  • Outer Diameter: 26mm
  • Thickness: 8mm
  • Rows Of Balls: single row
  • Seal: ZZ

6001ZZ Ball Bearing 12x28x8mm (Shielded)

20.00 EGP
  • Model: 6001
  • Material: Sheet Steel
  • Size: 12x28x8mm
  • Inner Diameter: 12mm
  • Outer Diameter: 28mm
  • Thickness: 8mm
  • Rows Of Balls: single row
  • Seal: ZZ

6900ZZ Ball Bearing 10x22x6mm (Shielded)

Original price was: 20.00 EGP.Current price is: 15.00 EGP.
  • Model: 6900
  • Material: Sheet Steel
  • Size: 10x22x6mm
  • Inner Diameter: 10mm
  • Outer Diameter: 22mm
  • Thickness: 6mm
  • Rows Of Balls: single row
  • Seal: ZZ

E3D Copper Volcano Nozzle 0.4mm for 1.75mm Filament

40.00 EGP

0.4mm E3D Copper Volcano Nozzle For 1.75mm Filament. Replacement nozzle for a compatible 3D printer hotend; check thread and hotend fit.

Mini Push Button 6x6x12mm (4 Pin)

3.00 EGP

Mini push button with four pins and dimensions of 6 x 6 x 12 mm. A compact switch for electronics projects and control panels.

KY-008 Laser Transmitter Module 5mW (Arduino Compatible)

35.00 EGP
  • The laser transmitter module, 650 nm (red), gives a small, intense beam (DOT) Shape.
  • Power consumption: 30 mA at 5 V

SN74HC4060N Counter IC (744060)

30.00 EGP

SN74HC4060N counter IC for digital timing and counting circuits. Check the device datasheet for pinout and operating limits.

Crocodile Clip Cable 45cm (Alligator)

10.00 EGP

Crocodile Cable (Alligator) 45cm Length. A cable in the stated connector configuration.

Boat Rocker Switch ON-OFF 3A 250VAC (Black)

5.00 EGP

Black boat-style ON/OFF rocker switch with a listed rating of 3 A at 250 VAC. Check the installation and circuit requirements before use.

S50 RFID Card 13.56MHz

11.00 EGP

S50 RFID CARD 13.56MHZ. An RFID item with the stated operating frequency and format.

Male Banana Plug 4mm (Red)

8.00 EGP

Male Banana Plug (4 mm) , Red Color. A plug in the stated connection format.

BZX79C9V1 Zener Diode 9.1V 500mW (DO-35)

2.00 EGP

BZX79C9V1 Zener diode with a listed 9.1V voltage and 500mW rating for suitable electronic circuits.

Male Banana Plug 4mm (Yellow)

Original price was: 8.00 EGP.Current price is: 3.75 EGP.

Male Banana Plug (4 mm) , Yellow Color. A plug in the stated connection format.

1602 LCD Display with I2C Module (16×2 Serial Character)

160.00 EGP

Clear, green backlit 2×16 character LCD with I2C serial interface, low pin count, adjustable backlight, and compatible with Arduino and Raspberry Pi projects.

Raspberry Pi 3 Model B

3,600.00 EGP

Raspberry Pi 3 Model B. A Raspberry Pi component or accessory identified by its model.

TT Gear Motor Plastic Bracket 4 Pcs (With Screws and Nuts)

45.00 EGP

Set of four plastic fixing brackets for TT gear motors, supplied with screws and nuts for mounting motors in robot projects.

Jumper Wire Set 30cm 10 Pin (Female to Female)

12.00 EGP

A female-to-female jumper-wire set with 30 cm leads and 10 connections.

Jumper Wire Set 20cm 10 Pin (Female to Female)

9.00 EGP

A female-to-female jumper-wire set with 20 cm leads and 10 connections.

Jumper Wire Set 20cm 10 Pin (Male to Female)

9.00 EGP

A male-to-female jumper-wire set with 20 cm leads and 10 connections.

Jumper Wire Set 20cm 10 Pin (Male to Male)

9.00 EGP

A male-to-male jumper-wire set with 20 cm leads and 10 connections.